About Us Contact Us Shipping Easy Returns Privacy Terms of Service
Skip to content
DTM RW-8 heavy duty label rewinder without a roll, front left view

DTM RW-8 Heavy Duty Label Rewinder and Unwinder

by DTM Print
Sold out
£559.98
SKU RW-8EU

Notify me when back in stock

Wider label stock and heavier rolls need more support beside the printer. The RW-8 is DTM’s powered winder for stock up to 220 mm wide and rolls up to 250 mm in diameter, built around a 76.2 mm core.

It can rewind finished printer output or unwind a supply roll in a compatible setup. This is the larger model to consider when your roll exceeds the RW-4/RW-7 capacity, provided your printer and downstream machine can handle the same media.

Overview

The RW-8 uses a sturdy support arm, guides and adjustable speed/direction controls for larger label rolls. It handles printed labels as part of the printer workflow; it does not apply labels to products and is not needed to collect the built-in waste liner on an AP380e or PL400e.

From printer to applicator

Once a roll has been printed and rewound, confirm its core, finished diameter, web width and winding direction against the applicator’s specifications. A roll that fits the RW-8 may still be too wide or large for the applicator you intend to use.

Choose Setup

Choose RW-8 if you need capacity up to 220 mm width, 250 mm diameter or 8 kg, and use a 76.2 mm core. For smaller stock, the RW-4 or RW-7 may be easier to match. The RW-8 is not a universal upgrade: check the printer and the next machine in the line before ordering.

Confirm your media

Send us the printer model, web width, roll diameter and weight, 76.2 mm core and label material. Very flexible label films can affect winding; arrange a stock check if uncertain.

Specs & Included
Specification Manufacturer information
Functions Powered rewinder and unwinder
Maximum roll width 220 mm
Maximum roll diameter / weight 250 mm / 8 kg
Core 76.2 mm (3 inch)
Maximum winding speed Up to 500 mm/s, adjustable
Size / weight 600 × 450 × 360 mm (W × H × D); approximately 9 kg
Power Universal power supply; confirm UK lead with us

Included

RW-8, power supply and instructions, as listed by DTM. The 38.1/50.8 mm adaptors supplied with RW-4/RW-7 are not listed for RW-8. Printer and label stock are separate.

Quickstart

↓ Download RW-8 quickstart (PDF) and manufacturer comparison.

FAQs

Will a roll from RW-8 fit my label applicator?Not necessarily. The RW-8 accepts larger and wider rolls than some applicators. Check the finished roll against the applicator’s width, diameter, core and wind-direction limits.

Can I use the smaller RW-4/RW-7 core adaptors?DTM lists the RW-8 for 76.2 mm cores and does not list the smaller adaptors in its supplied contents. We can confirm any special requirement before ordering.

Can it act as an unwinder?Yes, in a compatible printer setup. The exact label path and direction depend on the printer.

Is it for collecting backing paper from an AP380e?No. The AP380e includes its own waste-liner rewinder. The RW-8 handles supply or finished label rolls near the printer.

Delivery & Returns

Delivery

DTM normally dispatches from Germany to BatchPoint in London, a first leg of approximately 5–7 working days subject to stock and customs clearance. We then arrange onward UK delivery. For a standalone winder order or an add-on to a machine, we will confirm the full delivery charge and estimate before accepting your order. Delivery dates are estimates; see Delivery Information.

Returns and cancellations

Please check the roll and printer fit with us before ordering. Contact BatchPoint before cancelling or sending anything back. Change-of-mind returns for business purchases require our written agreement; your applicable statutory rights are unaffected. If goods arrive damaged or incorrect, contact us promptly with photographs and retain the packaging. See Returns and Cancellations.

Warranty & Support

Manufacturer warranty

DTM’s standard warranty is 12 months for qualifying UK purchases. Register the unit within 30 days of purchase for the free extension to 36 months, subject to DTM’s terms. Keep the purchase invoice and serial number and register with DTM.

Support

BatchPoint is your first contact for setup and after-sales questions. Email contact@batchpointequipment.com with your order number, printer model, roll dimensions and photographs if needed. We will involve DTM’s technical team where appropriate. Do not send a unit for repair until we have confirmed the process and carriage arrangements.

Wider label stock and heavier rolls need more support beside the printer. The RW-8 is DTM’s powered winder for stock up to 220 mm wide and rolls up to 250 mm in diameter, built around a 76.2 mm core.

It can rewind finished printer output or unwind a supply roll in a compatible setup. This is the larger model to consider when your roll exceeds the RW-4/RW-7 capacity, provided your printer and downstream machine can handle the same media.

Overview

The RW-8 uses a sturdy support arm, guides and adjustable speed/direction controls for larger label rolls. It handles printed labels as part of the printer workflow; it does not apply labels to products and is not needed to collect the built-in waste liner on an AP380e or PL400e.

From printer to applicator

Once a roll has been printed and rewound, confirm its core, finished diameter, web width and winding direction against the applicator’s specifications. A roll that fits the RW-8 may still be too wide or large for the applicator you intend to use.

Choose Setup

Choose RW-8 if you need capacity up to 220 mm width, 250 mm diameter or 8 kg, and use a 76.2 mm core. For smaller stock, the RW-4 or RW-7 may be easier to match. The RW-8 is not a universal upgrade: check the printer and the next machine in the line before ordering.

Confirm your media

Send us the printer model, web width, roll diameter and weight, 76.2 mm core and label material. Very flexible label films can affect winding; arrange a stock check if uncertain.

Specs & Included
Specification Manufacturer information
Functions Powered rewinder and unwinder
Maximum roll width 220 mm
Maximum roll diameter / weight 250 mm / 8 kg
Core 76.2 mm (3 inch)
Maximum winding speed Up to 500 mm/s, adjustable
Size / weight 600 × 450 × 360 mm (W × H × D); approximately 9 kg
Power Universal power supply; confirm UK lead with us

Included

RW-8, power supply and instructions, as listed by DTM. The 38.1/50.8 mm adaptors supplied with RW-4/RW-7 are not listed for RW-8. Printer and label stock are separate.

Quickstart

↓ Download RW-8 quickstart (PDF) and manufacturer comparison.

FAQs

Will a roll from RW-8 fit my label applicator?Not necessarily. The RW-8 accepts larger and wider rolls than some applicators. Check the finished roll against the applicator’s width, diameter, core and wind-direction limits.

Can I use the smaller RW-4/RW-7 core adaptors?DTM lists the RW-8 for 76.2 mm cores and does not list the smaller adaptors in its supplied contents. We can confirm any special requirement before ordering.

Can it act as an unwinder?Yes, in a compatible printer setup. The exact label path and direction depend on the printer.

Is it for collecting backing paper from an AP380e?No. The AP380e includes its own waste-liner rewinder. The RW-8 handles supply or finished label rolls near the printer.

Delivery & Returns

Delivery

DTM normally dispatches from Germany to BatchPoint in London, a first leg of approximately 5–7 working days subject to stock and customs clearance. We then arrange onward UK delivery. For a standalone winder order or an add-on to a machine, we will confirm the full delivery charge and estimate before accepting your order. Delivery dates are estimates; see Delivery Information.

Returns and cancellations

Please check the roll and printer fit with us before ordering. Contact BatchPoint before cancelling or sending anything back. Change-of-mind returns for business purchases require our written agreement; your applicable statutory rights are unaffected. If goods arrive damaged or incorrect, contact us promptly with photographs and retain the packaging. See Returns and Cancellations.

Warranty & Support

Manufacturer warranty

DTM’s standard warranty is 12 months for qualifying UK purchases. Register the unit within 30 days of purchase for the free extension to 36 months, subject to DTM’s terms. Keep the purchase invoice and serial number and register with DTM.

Support

BatchPoint is your first contact for setup and after-sales questions. Email contact@batchpointequipment.com with your order number, printer model, roll dimensions and photographs if needed. We will involve DTM’s technical team where appropriate. Do not send a unit for repair until we have confirmed the process and carriage arrangements.